Displays the current ping protection state for IPv4 or IPv6 routes, along with the number of protected routes. The information can be displayed per gateway, or for all gateways in a given VR.
| ipv4 | Specifies IPv4 routes (default). |
| ipv6 | Specifies IPv6 routes. |
| protection ping | Specifies protection ping information. |
| v4_or_v6_gateway | Name of the specific IPv4 or IPv6 gateway to show protected routes for. |
| vr vr_name | Shows all protected routes for the specified VR. |
| detail | Displays timestamps of the last time each gateway transitioned to the "up" state and to the "down" state. |
If not specified, IPv4 is the default.
The following example shows all ping protected IPv4 routes only:
# show iproute protection ping
Ping protection for static IPv4 routes : Enabled
Interval : 2
Misses : 3
Gateway State # Routes VR
--------------- ----- -------- --------------------------------
1.2.3.4 Down 1 VR-Default
1.2.3.5 Up 1 VR-Default
The following example shows ping protected IPv6 routes only:
# show iproute ipv6 protection ping
Ping protection for static IPv6 routes : Enabled
Interval : 2
Misses : 3
Gateway State # Routes VR
--------------------------------------- ----- -------- ----------
2000:2000:2000:2000:2000:2000:2000:2001 Up 2 VR-Default
3000::2 Down 2 VR-Default
The following example shows ping protected IPv6 routes with gateway up/down transition timestamp information:
# show iproute ipv6 protection ping detail
Ping protection for static IPv6 routes : Enabled
Interval : 2
Misses : 3
Gateway: 2000:2000:2000:2000:2000:2000:2000:2001
State: Up
# Routes: 2
VR: VR-Default
Last Up: Thu Mar 31 22:44:12 2016
Last Down: Thu Mar 31 22:42:22 2016
Gateway: 3000::2
State: Down
# Routes: 2
VR: VR-Default
Last Up: --
Last Down: Thu Mar 31 22:42:22 2016
This command was first available in ExtremeXOS 22.1.
This command is available on all platforms with any license level as described in the Switch Engine v33.1.1 Licensing Guide document.